TRANTOR SYSTEMS, LTD.

T128F

Data bus: 16-bit, ISA

Size: Three-quarter length, full-height card

Hard drives supported: Up to seven SCSI devices

Floppy drives supported: None

[Image]

                                CONNECTIONS

                     Function                             Location

  50-pin SCSI connector-internal                             CN1

  50-pin SCSI connector-external                             CN2

  34-pin control cable connector-floppy drives 0             CN3
  and 1

  34-pin control cable connector-floppy drives 2             CN4
  and 3

  4-pin connector-Drive Active LED                           CN5

                        USER CONFIGURABLE SETTINGS

              Function                    Location            Setting

  »   Full Handshake Interlock          SW1/switch 3            on
      disabled

      Full Handshake Interlock          SW1/switch 3            off
      enabled

  »   BIOS enabled                      SW1/switch 4            off

      BIOS disabled                     SW1/switch 4            on

  »   Zero wait-state disabled          SW1/switch 5            on

      Zero wait-state enabled           SW1/switch 5            off

  »   Floppy drive enabled              SW1/switch 8            on

      Floppy drive disabled             SW1/switch 8            off

  Note: SW1/switches 1 and 2 are reversed and must be left "on".

                 BIOS ADDRESS

    Address       SW1/switch 6   SW1/switch 7

     CC000h           on              on

     C8000h           on             off

     DC000h           off             on

     D8000h           off            off

                             INTERRUPT REQUEST

           IRQ                     JP1                    Position

          IRQ3               pins 2 & 4 only               closed

          IRQ5               pins 1 & 3 only               closed

          IRQ7               pins 3 & 5 only               closed

          IRQ10              pins 8 & 10 only              closed

          IRQ12              pins 7 & 9 only               closed

          IRQ14             pins 10 & 12 only              closed

          IRQ15              pins 9 & 11 only              closed

        Disabled             pins 1 through 12              open
                                   only